Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Styrolution® PS 168L - PS - INEOS Styrolution

Material Data Center offers the following functions for Styrolution® PS 168L:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Styrolution PS datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 1.5 cm³/10min ISO 1133
온도 200 °C -
하중 5 kg -
성형 수축률, 평행 0.5 % ISO 294-4, 2577
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 3300 MPa ISO 527
항복강도 59 MPa ISO 527
파단시 신율 3 % ISO 527
탄성변형률, 1h 3300 MPa ISO 899-1
탄성변형률, 1000h 2600 MPa ISO 899-1
챠피 충격 강도, +23°C 25 kJ/m² ISO 179/1eU
Ball indentation hardness 150 MPa ISO 2039-1
열적 특성값단위시험규격
ISO 데이터
선형 열팽창 계수, 평행 80 E-6/K ISO 11359-1/-2
ASTM 데이터
비카트 연화 온도 108 °C ASTM D 1525
전기적 특성값단위시험규격
ISO 데이터
상대 유전율, 100Hz 2.5 - IEC 62631-2-1
부피 저항 >1E13 Ohm*m IEC 62631-3-1
표면 저항 1E14 Ohm IEC 62631-3-2
기타 특성값단위시험규격
물에서의 흡수성 0.1 % ISO 62와 유사
조건에서의 흡습성 0.1 % ISO 62와 유사
밀도 1040 kg/m³ ISO 1183
특징
생산 공정
시트 압출
인도 유형
펠렛 (입자,알갱이)
특별 특성
열안정성
특성
Blending Resin, Foamable
응용
범용
지역별 검색
짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.